|
Engine
|
Deutz TD2.9L4 diesel engine
output: 36 kW/ 50 hp
4 cylinders, water-cooled, turbocharger,
Cleanfix reversible fan, combination radiator,
45-litre fuel tank
|
Deutz TD2.9L4 diesel engine
output: 55 kW/75 hp,
4 cylinders, water-cooled, turbocharger,
Cleanfix reversible fan, combination radiator,
45-litre fuel tank
|
|
Driving hydraulics
|
Closed, proportional dual-circuit system, all movements can be controlled remotely, gradual driving speed adaptation, first speed stage 0-3 km/h, second speed stage 0-6 km/h
Final speed can be gradually preselected, drift setting to compensate for the downgrade force when mowing across a slope, automatically hydraulically tensioned dual stator
|
|
Running gear
|
Caterpillar track running gear with rubber tracks in AS design (250 mm wide, 1,650 mm long)
hydraulically adjustable in width
|
|
Running gear
|
Torsion-resistant box frame made of special steel, large, lockable storage bin integrated on the running gear
Various attachment points for securing the tractor, Solid steel underbody protection housing, All-round branch deflectors with integrated hood protector
|
|
On-board hydraulics
|
Separate oil circuit with pump (18 l/min at 200 bar)
One proportional control unit for hoist with water submersion position
|
|
Operation
|
Remote control for all functions (emergency stop, throttle adjustment of diesel engine, driving and steering, reversible fan, first and second gear, drift adjustment, optional hoist compensation, cable winch control, stacking shield up/down, water submersion position for hoisting mechanism, adjustable width, PTO on/off, auxiliary control valves, signal horn, lighting), cable winch operation/third-party consumers
|
| Dimensions |
Length 2,300 mm, width 1,150 mm/1,550 mm, height 1,350 mm, weight 1,400 kg
|
Length 2,300 mm, width 1,150 mm/1,550 mm, height 1,350 mm, weight 1,450 kg |
|
Accessories
|
|
|
|
Track with a width of 300 mm (instead of 250 mm as standard)
|
optional |
optional |
|
LED working spotlights at the front and rear (tractor)
|
optional |
optional |
|
Roll bars
|
optional |
optional |
|
Three-point hitch for external equipment
|
optional |
optional |
|
Hoist compensation for rear hydraulics
|
optional |
optional |
|
Front power lift with a maximum lifting force of 7kN
(double-action black/white control valve required)
|
optional |
optional |
|
Tractor PTO transmission
- Zero-maintenance, oil-cooled, multi-plate clutch that runs in an oil bath
- PTO speed at transmission approximately 540 and 2,100 rpm.
|
optional |
optional |
|
Performance hydraulics
- Closed oil circuit with axial piston adjustment pump generating a maximum output of 48 kW
- Gradually adjustable oil supply quantity 0 - 96 l
- 300 bar maximum pressure
- with multicoupler (A+B+leak oil, 12V voltage)
|
optional |
optional |
|
Depressurised return with bracket
|
optional |
optional |
|
Proportional DW valve
|
max. 4 |
max. 4 |
|
Black/white DW valve
|
max. 2 |
max. 2 |
|
Auxiliary front cable winch (requires additional DW control valve)
- 10 kN tractive force
- Ø 6 mm x 30 m cable (max. 50 m)
- Cable infeed roller and cable brake
- Controlled using tractor’s remote control
- Supply and return with freewheeling coupling
|
optional |
optional |
|
Cable winch units
|
|
|
|
Hydraulic cable winch, 50 kN tractive force
Prerequisite: Performance hydraulics
- Worm gear drive: power transferred to the cable drums using hydraulically operated multi-plate clutches
- Tractive force 50 kN
- Max. cable capacity 110 m x 11 mm
- Average cable speed (hydr.) 0.40 m/s
- Multi-plate brake
- Sintered disc clutch
- Electr. solenoid valve control (wet armature)
- Stacking shield:
- Hydraulically height-adjustable with pressing function
- Cable roll adapts to height
- Lifting capacity at leveller: 14kN
- Shield width approx. 1100 mm
- K 50 attachment jaw and combination bolt (ball-type design)
|
optional |
optional |
|
Hydraulic cable winch, 60 kN tractive force
Prerequisite: Performance hydraulics
- force 60 kN
- cable capacity 110 m x 11 mm
All other data corresponds to the cable winch unit with a tractive force of 50 kN
|
optional |
optional |
| Hydraulic cable winch, 72 kN tractive force
Prerequisite: Performance hydraulics
- force 72 kN
- cable capacity 90 m x 12 mm
All other data corresponds to the cable winch unit with a tractive force of 50 kN
|
optional |
optional |
|
Cable infeed brake
|
optional |
optional |
|
Excavation device – mechanical installation and removal aid for quick change of winch
|
optional |
optional |
|
Attachments for multifunctional applications
|
|
|
|
Forestry mulcher
Prerequisite: PTO transmission
Mulcher with a working width of approx. 1,200 mm, mechanically driven by the PTO, three-point linkage, cutting rotor features special blades arranged in spirals to guarantee constant and equal coverage of the mowing area, with mechanical lateral offset (approx. 400 mm)
Scope of delivery includes hoist, PTO shaft and 3-point hitch
|
optional |
optional |
|
Forestry mulcher with hydraulic flap
Prerequisite: PTO transmission and additional DW control valve
|
optional |
optional |
|
Forestry mulcher MAX with hydraulic flap
Prerequisite: PTO transmission and additional DW control valve
Mechanically driven by PTO, with hydraulic flap and mechanical lateral offset featuring 40 hard-metal round tools that can be used on three sides (by rotating the tool), arranged in spiral, tool movement diameter 340 mm, required input from 20 kW with Cardan shaft
|
optional |
optional |
|
Sowing strip mulcher
Prerequisite: PTO transmission
200 mm mulching depth, mechanically driven by PTO, V-shaped trenches (width at the top: 200, width at the bottom: 20 mm), hard-metal teeth featuring Cardan shaft
|
optional |
optional |
|
Sowing module with bunker (in conjunction with strip mulcher only)
Separate bunkers for coarse sowing with a capacity of approximately 55 l and fine sowing with a capacity of 10 l, electrically adjustable sowing frequency, automatic deactivation of the sowing unit when the vehicle is at standstill, Makrolon lid as sight glass
|
optional |
optional |
