Multipurpose unit
In addition to a permanently installed cable winch Moritz boasts so many more functions to make it suitable for use as an off-road carrier vehicle. The cable winch, installed using a quick-change system, can be removed in only a few steps. You can then mount tools to the vehicle using the three-point mount (cat. 1).
Running gear
The chassis width of the Moritz Fr50 can be adjusted to achieve the optimum width for both transport and for off-road operations. The chassis can be hydraulically widened by 400mm. This means that the mini felling tractor can also be safely operated on slopes. The wide chassis and the low dead weight of the caterpillar create a low ground pressure of only 0.30 kg / cm². Even on wet ground, it is thus possible to work and drive without causing damage to the soil. With the front and rear climbing angle of 45°, the mini felling tractor can easily make the transition from forest tracks into the standing timber. The large ground clearance of 300 mm allows the tractor to easily pick its way over roots and stumps and to manoeuvre on forwarding trail
Traction drive
For accessing the felling zone or log forwarding, the proportional drive supports two speeds. The maximum speed of the mini felling tractor is 6.5 km/h.
Secure footing
The stacking shield is the basis for all winching work. This is equipped with double-action hydraulic cylinders. If the weight of the caterpillar is not sufficient for winch work, it can be additionally secured to another object (for example a tree) within a very short time.
The cable infeed height of the mini felling tractor is adjusted. So the height of the cable infeed can be adjusted when in use, this is integrated in the height-adjustable stacking shield.
| PS RH - 1135/5 | |
|---|---|
| Engine |
Kubota 4-cylinder diesel engine, power rating 26 kW/ 35 hp, fuel capacity 30 L |
|
Drive |
Hydrostatic drive, all driving functions can be proportionally adjusted by remote control, driving speed 0 - 6.5 km/h (infinitely adjustable) |
| Running gear |
Caterpillar tracks with rubber tracks in AS version, width hydraulically adjustable, hydraulic holding brake |
| Chassis |
Torsion-resistant box frame made of special steel, large storage compartment integrated on the chassis, various attachment points for securing the tractor |
|
Control |
Wireless remote control for all functions (emergency stop, throttle adjustment of diesel engine, driving and steering, winch control, stacking shield, horn) |
| Dimensions | Length 2,200 mm, width 1,120 mm / 1,500 mm, height 1,205 mm, weight 1,050 kg |
|
Accessories |
|
| Running gear length (1,700 mm) | optional |
| Front weight forwarding tractor | optional (approx. 110 kg - transport box option not possible) |
| Front transport box with attachment |
optional (front weight option not possible) |
| Roll bar incl. floodlight | optional |
|
Front-mounted, auxiliary cable winch
|
optional |
|
Cable winch operation accessories |
|
|
Mechanical cable winch 40 kN tractive force
|
optional |
| Hydraulic cable winch, 40 kN tractive force
(for technical specs see cable winch with mechanical drive) |
optional |
|
Mechanical cable winch 50 kN tractive force
|
optional |
| Hydraulic cable winch, 50 kN tractive force
(for technical specs see cable winch with mechanical drive) |
optional |
| Cable infeed brake | optional |
| Excavation device – mechanical installation and removal aid for quick change of winch | optional |
|
Accessories for multifunction operation |
|
| 3-point hitch for detachable implements | optional |
| Water submersion position for hoisting mechanism | optional |
| Tractor PTO transmission | optional |
| Hydraulic auxiliary control valves (up to 3 control valves possible) | optional |
| De-pressurised return for mini felling tractor including bracket | optional |
|
Attachments for multifunction operation |
|
|
Mulcher with 1,200 mm working width (mechanically driven via PTO) Rotor blade with spirally arranged, special blades to guarantee a constant and equal processing of the mowed area Mechanical lateral displacement (approx. 400 mm) |
optional |
| Mulcher with 1,200 mm working width, additionally with hydraulic flap | optional |
|
Forestry mulcher tool featuring hydraulic flap with 1,200 mm working width (mechanically driven via PTO) With hydraulic flap and mechanical lateral displacement 40 round teeth made of hardened metal that can be used on three sides (turn teeth), arranged spirally 340 mm tool processing diameter, power demand from 20 kW |
optional |
| Lateral hydraulic adjustment for mulcher or forestry mulcher tool | optional |
|
Strip mulcher (mechanically driven via PTO) 200 mm mulching depth, v-shaped rift (200 mm wide at the top, 20 mm wide at the bottom) Teeth made of hardened metal |
optional |
|
Sowing module with bunker (in conjunction with strip mulcher only) Separate bunkers for coarse seeds (approximately 55 l capacity) and fine seeds (capacity: 10 l), electrically adjustable sowing frequency, automatic sowing unit deactivation if vehicle comes to standstill, macrolon lid to check contents |
optional |
Contact us through the webform below. We will get back to you as soon as possible.
Fields marked with * are mandatory!
