Stubble Cultivators CTC

For todays modern farms the demands for cultivation have changed. Tight time slots have to be balanced with higher machine performance. Restricted crop rotations call for an adaption in techniques that accomplish all requirements of modern crop cultivation. Kverneland proposes different configurations depending on the conditions of use, but also the power ability:

The CTC has a well-organised tine arrangement over 3 or 4 tine rows. The capacity with long residues has really been a focus during the design process ensuring optimum mixing and intensive cultivation. The row distance varies between 270mm and 200mm; the tine position has been optimised to ensure a smooth soil flow across the entire working width but also around the transport wheels.

• CTC with 3 tine rows and 270mm tine spacing
• CTC with 4 tine rows and 200mm tine spacing

• Complete cutting
• Perfect mixing & levelling
• Low pulling force needed
• Wide range of rollers
• Reduced maintenance
• Versatile from shallow to medium
• Large performance by high speed
• Stone protection

• The CTC can be equipped with 3 rows of tines (spacing 270mm) and front working discs or with 4 rows of tines (spacing 200mm) ensuring optimum mixing and intensive cultivation.
• A maximum working depth of 30cm is possible
• The wing shares, when fitted, ensure that the entire working width of the machine is cultivated even when the machine is adjusted for shallow work.
• The high inter-row clearance up to a maximum of 150cm and the underbeam clearance of 87cm ensure blockage-free operation under any conditions.
• The outer wings are pre-loaded by hydraulic accumulators and can be adjusted to suit the various field conditions

Triflex 700: High stability at deep operations

The Triflex 700 tine can be equipped with different shares to adapt to different working depths and tasks. 7 types of share equipments are available with the patented Knock-on® system. It is the easiest way of changing parts on a cultivator, either to adapt the machine to the job to be done or to change wearing parts.

The disc system has a centralized hydraulic depth adjustment with master slave cylinder system and individual rubber disc protection. This overload system allows the disc to follow the ground contour very well.
As the working depth of the disc section is limited to 5cm, the required pulling force is insignificantly low.

Front Mixing Disc (FMD)

The front mixing disc (FMD) option is the ideal equipment that avoid any boiling effect in front of the tines especially with short wheat straw. The FMD system has notched hollow discs which are ideal when working in high amounts of crop residues. The FMD system pre-mixes any straw standing on the top of the stubble to ensure thorough mixing by the stubbling tines for improved incorporation. The adjustment of the pressure can be done on the move from the cab hydraulically.

Front Cutting Disc (FCD)

The FCD system has notched straight discs which are mounted in front of the first row of tines. The FCD system is ideal when working in maize straw for example, where the disc is cutting the straw directly in front of the tines. The straw is cut to improve the flow of material and prevent the machine from blocking.