The rotary tiller type GF 200, mounted in the rear or in the front of the tractor, is suitable as a full width tiller for an optimum seedbed preparation for the cultivation of various vegetables and potatoes. An ideal prepared seedbed is the prerequisite for optimum development of the seed resp. planting tubers. Through intensive soil cultivation, root crop ground preparation is perfectly achieved so that undisturbed growth of the crop can be guaranteed. For conventional hilling (in a second working step) the rotary tiller GF 200 can be modified to be used as a rotary hiller with rear attachment at the tractor. The machine can be converted from independent rows to a full width tiller with a few simple steps. When attached to the front of the tractor, the GF 200 can be perfectly combined with a potato planter at the rear side of the tractor. The drive is designed for a tractor output up to 165 HP.
The ideal seedbed
Through intensive soil cultivation, root crop ground preparation is perfectly achieved so that undisturbed growth of the crop can be guaranteed.
The ideal combination
The GRIMME Rotary Tiller GF 200 with front attachment, is ideally suited to be combined with a trailed or mounted 2-row potato planters. Convenient especially for short headlands and smaller acreage, a compact tractor implement combination is available for these requirements.
Even deep guidance
The large carriage roller ensure an even working depth.
Preparatory work
Ridge shaper with integrated formers that prevent loosened soil from being compacted by the tractor wheels.
Combined plant protection
GRIMME tank system TS 420 on the rotary hiller GF 200 at tractor front. Authorized for liquid chemicals to be applied onto the seed potatoes and/or into the furrow
Suitable for very stony soils
Rotor shaft with extra stable spikes for very stony conditions.
Technical specifications
Dimensions |
|
Length | 2350 mm |
Width at row width 75 cm | 1790 mm |
Width at row width 90 cm | 2090 mm |
Height | 1450 mm |
Weight |
|
Empty weight with basic configuration | 1400 kg |
Working width |
|
Working width | 1,5 - 1,8 m |
Row width | 75 - 90 cm |
Number of rows | 2 |
Tractor attachment |
|
Lower linkage category | 2 Cat. |
Drive |
|
Input speed p.t.o.-shaft | 1000 rpm |
Rotor speed | 350 rpm |
Soil cultivation |
|
Tine rotor diameter | 740 mm |
Number of tines |
|
Rotor shaft for hilling the ridges | 44 |
Rotor shaft with full-width setup | 68 |
Tractor requirements |
|
Engine power (min.) | 50 kW |