Horsch

Horsch Partner HT, Partner FT - hopper

Kontrolirano vnašanje gnojila med obdelavo tal

Kontrolirano vnašanje gnojila med obdelavo tal

Inquiry
Send inquiry

FFSend an inquiry

Enter your information and our consulting team will contact you within 5-7 working days.
Horsch Partner HT, Partner FT - hopper
Horsch Horsch Partner HT, Partner FT - hopper
At Grapak A1 d.o.o. we pay special attention to the protection of your personal data. Please read Privacy Policy for more information on how your data is collected and used.
I agree that you process my personal information in order to inform me about future news, offers, changes and improvements, via email. Privacy Policy
Horsch Partner HT, Partner FT - hopper

The rear hopper Partner HT is a double hopper. The total capacity is 2 800 litres, partitioned in a ratio of 40 : 60. This allows for metering two different components or one component from both hoppers to make use of the whole capacity.

In practice, the following applications are possible:

  • One kind of fertiliser from both hoppers
  • Two different fertiliser components (e.g. phosphor and potash fertiliser)
  • Seed and fertiliser (rape and deep fertilisation)
  • Two seeds, especially if the grain sizes differ considerably


Moreover, the targeted fertilisation increases efficiency and compared to conventional fertilisation saves costs. Especially for phosphate, the system helps to improve fertiliser efficiency. The placed fertiliser is immediately and permanently available to the plant.
The HORSCH Partner HT is linked to the 3-point linkage of the tractor. It can be linked to a tillage tool (e.g. HORSCH Joker RT, Tiger AS / MT, Terrano FM / MT / GX) via a lower link at the Partner HT, K 80 ball hitch coupling or drawbar. Due to the design of the rear hopper the visibility into the working tool is optimum.

Partner 1600 FT

The single hopper with a capacity of 1 600 liter can be used for deep fertilisation in combination with a single grain seed drill (Maestro RV), a seed drill (Express 4 KR) or in tillage sector. The compact design of the Partner FT allows for an optimum front vision. The feed opening is rather large and allows for a quick filling with a front loader or a telehandler

An additional weight of 360 kg can be added to the Partner FT (dead weight of 700 kg). The additional weight is available as an option. Thus, even with an empty front hopper, the tractor is balanced ideally.
To guarantee an optimum soil protection the front hopper can be equipped with an intermediate packer: a RollPack packer with 280 kg or a typre packer with an additional weight of 230 kg.
High throughput volumes are required when applying fertiliser to be prepared for all situations and operational speeds. Beside the possibility to apply high quantities, the advantage of the pressurised hopper Partner FT is that there is no dust formation in front of the tractor. The transport is carried out in a closed system to the fertiliser / seed coulter.

Partner 2000 FT

The Partner 2000 FT is a double hopper and has a capacity of 2 200 liter in total. Depending on the intended use, 2 basic versions are available: 

  • Double hopper with a 60 : 40 partition and two metering devices  
  • Double hopper with a 75 : 25 partition, a metering device and a micro-granular metering unit


Technical specifications


Partner 1600 FT

Transport width (m)

2.50 

Height (m) 1.56
Length without additional weight (m) 1.44
Weight without additional weight (kg) 700
Hopper capacity (l) 1 600
Dimensions of feed openings (m) 2.30 x 0.67 
Filling height (m) 1.56
DA control devices 1
Depressurized return flow (max. 5 bar) 1
Oil quantity hydr. fan (l/min) 20 – 35
Tractor-side tool linkage 3-point Cat. II and III



Partner 2000 FT

Transport width (m)

2.71

Height (without / with tyre packer) (m) 1.65 / 1.90 
Length (without / with tyre packer) (m) 1.66 / 1.70 
Weight (without / with additional weight) (kg) 1 040 / 1 430
Additional weight with tyre packer (kg) 280
Hopper capacity (l) 2 200 (partitioned hopper 1 320 : 880 l /
60 : 40 or 1 650 : 550 l / 75 : 25)
Dimensions of feed openings (m) 0.83 x 0.66 (small chamber) /
1.45 x 0.66 (large chamber)
Filling height (without / with tyre packer) (m) 1.57 / 1.82
DA control devices 1
Depressurized return flow (max. 5 bar) 1
Oil quantity hydr. fan (l/min) 20 – 35
Tractor-side tool linkage 3-point Cat. II and III



Partner HT

Transport width (m)

2.84

Height (m) 1.82
Length (m) 1.19
Weight (kg) 1 100
Hopper capacity, double hopper (l) 2 800 (40 : 60 / 1 120 :  1 680)
Dimensions of feed openings (m) per 1.12 x 0.55
Filling height double hopper (m) 1.90 
DA control devices 3 (1 DA for hydr. fan – direct drive, 2 DA for attached tool)
Depressurized return flow (max. 5 bar) 1
Oil quantity hydr. fan (l/min) 35 – 45
Tractor-side tool linkage 3-point Cat. II and III / IV
Machine-side tool linkage (lower link) Cat. III
Machine-side tool linkage (ball-type coupling) K 80
Machine-side tool linkage (Drawbar) Cat. IV (Pin Ø 50 mm)



Video

Kontaktirajte nas

Contact us through the webform below. We will get back to you as soon as possible.

Fields marked with * are mandatory!

At Grapak A1 d.o.o. we pay special attention to the protection of your personal data. Please read Privacy Policy for more information on how your data is collected and used.
I agree that you process my personal information in order to inform me about future news, offers, changes and improvements, via email. Privacy Policy