- Simple and fast set up and take down,
- Reliable and easy hydraulic (Type AHK and VIP PRO) or mechanical control (Type A),
- Very simple and fast installation to tractor's three point mounting system,
- Robotic welded stable and robust construction, made of high quality steel, laser cut and powder
coated, - Sturdy drive line, each shaft with double bearings and double reduction gearing
(winches from 10,000 Ibs to 22,500 Ibs), - Highly efficient clutch activation, even with mec
POWERED UPPER PULLEY
- Facilitates work and increases rope lifespan
- Button push, instead of manual tiresome rope pulling
- Good pull rope grip – reliable operation, independent of external influences
- Help with rope extraction from the drum – ensures steady wire rope winding or unwinding when wire rope is not under load
- Minimal maintenance
- SERIAL with SG type
- OPTIONAL with AHK type hydraulic winches
PARALLEL HOOKS / BALL JOINTS
Hooked to the end of wire rope
- Hook parallel P10
- Hook Parallel P13
Ball Joint
- Ball Joint rotating ø 10- ø 13 mm
- Ball Joint rotating ø 8 - ø 10 mm
SLIDING HOOKS / SLIDERS
- Sliding Hook
Sliders
- Slider (22,046 Ibs)
- Slider POK
- Slider Rotating D7-8
RADIO REMOTE CONTROL
EGV and VIP PRO, IMET M880 ARES2 E4 + LDC
P.T.O. SHAFTS
P.T.O. Shaft C Line-T 4BR+ KK560
SNATCH BLOCK
- Tajfun PS 130 + Load Belt 6.6'
- Tajfun PS 130 + Load Belt 9.9'
RETURN DRUM BP 3
CHAINSAIL HOLDER
FUEL CONTAINER HOLDER
HYDRO POWER UNIT
- Hydro power unit HP 25 EGV 45 + 55
The hydro power unit is a tractor PTO drive replacement for a forestry winch. The drive is equipped with a hydraulic motor that is attached to the frame of the forestry winch. The connection to the forestry winch is direct, without a PTO shaft (cardan). This solution is ideal if no PTO drive is available, only the hydraulic system of the power unit. The hydro power unit is connected to the power unit with hydraulic hoses, and power is guaranteed. The unit includes a meter showing the number of rpm and the working hours.
Technical specifications
Pulling Power | 10,000 lbs |
---|---|
Brake Power | 12,500 lbs |
Gear Ratio | 1 : 8.89 |
Rope Velocity (at 540 rpm) | 21.25'' - 42.5''/s |
Required Tractor Capacity | 20 - 50 HP |
Weight Without Wire Rope | 772 lbs |
Mounting | I, II |
Width | 55'' |
Lenght | 21'' |
Transport Height | 54'' |
Overall Height | 91'' |